Menu
Taper end mill is used to make a taper hole by a plunging operation. A hole should be machined prior to the machining of the taper end mill. The hole size should be greater by 0.2 or 0.3 than the minor diameter of the taper end mill. Application for such end mill is found where compressor plate slots are machined. These plates are made of stainless steel(SS 420).
feed = 0.03-0.04 mm per tooth.
cutting speed =100 m/min.
To enable us to offer the right geometry, coating etc. please fill out the form below, enter Your email ID and click ‘SEND‘, we will revert promptly with a preliminary offer by mail or by our Sales Engineer, who after studying your application would submit our final offer for your actions. You can also download and take a printout add your values and Email to marketing@aayudh.co.in
Application Input Attachements : If you have more than one file please zip it and then attach. Attachment file should not be more than 5mb
Solid Carbide Tools are normally PVD coated to enhance their performance in terms of Tool Life and Productivity. Aayudh Tools will decide the PVD Coating based on your application and your inputs. In case you have any specific prefernce please specify in the Comments / Special instructions field. Aayudh Tools will evalutae and revert with our recommendations.
©2025. Aayudh Tools. All Rights Reserved.